Description
- Extends the collet by 60mm
- When working with a router table which has a table made of thick material, typically the cast iron type or home made tables, a collet extension may be required
- Certain jobs require the cutter to be lifted above the surface of the table: If the table is thick, there may not be enough plunge depth on the router to achieve this
- This collet extension can be used with all 1/2″ shank routers and will lift the cutter by an additional 60mm
- A 19mm and a 22mm spanner are required to tighten the collet
- To use 1/4″ shank cutters, you can add the collet sleeve made by Trend, which reduces the collet to 6.35mm
