Surfaces must be clean and free from loose material, standing water or contaminants which may otherwise impair the bond. FC1 Filler & Caulk should not be applied in temperatures below 5 degrees C, or in areas of constant water immersion.

Non-porous surfaces such as aluminium should be cleaned with a suitable product.

Apply FC1 Filler & Caulk firmly into the joint using an application gun:

• Cut the cartridge at the nose above the tread.

• Crew on the nozzle

• Cut off the nozzle to the desired dimensions

• Slot the cartridge into the application gun and pull the trigger to express product

• Ensure a good solid fill is achieved

Once applied, FC1 Filler & Caulk can be tooled to required finish.

Sanding is not required.

Surrounding surfaces and tools can be cleaned with water.

For application where some movement will be exhibited i.e. larger construction joints, the minimum joint dimensions should be 6mm x 6mm with the maximum dimensions being 25mm wide by 12mm deep.

Depending on application, FC1 Filler & Caulk can be easily painted over with waterborne paints in as little as one hour – and with solvent paints once it is fully cured.

EN ISO 11600

BS EN 15651

The post FC1 Ultimate All-In-One Filler & Caulk 310ml–£4.70EACH OR 12 FOR £49.00 appeared first on Elmers Hardware.

The post HILKA CAULKING GUN 78400011 appeared first on Elmers Hardware.

Excellent sanitaryware product for use in all public Health institutions including hospitals and clinics.

Tested under MOD IOS 22196:2011, BT1 has proven to reduce bacteria by up to 99.99% and effective against a broad spectrum of microbes including MRSA, E. coli and Campylobacter.

EC1 Plus Certified – Very Low Emissions.

ETAG approved for bonding shower Panels without mechanical fixings.

BT1 will form a unique durable compound with high elasticity.

BT1 will successfully bond:

• Woods
• Metals
• Brickwork
• Concrete
• Fiberglass
• Glass
• Ceramics
• uPVC

And most plastics (except PP, PE and PTFE), even in wet conditions.

The post CT1 BT1 Ultimate Bathroom Sealant and Adhesive 290ml appeared first on Elmers Hardware.

The post CT1 SEALANT AND ADHESIVE BEIGE 290ML appeared first on Elmers Hardware.

The post CT1 SEALANT AND ADHESIVE BLACK 290ML appeared first on Elmers Hardware.

The post CT1 SEALANT AND ADHESIVE WHITE 290ML appeared first on Elmers Hardware.

The post CT1 SEALANT AND ADHESIVE BROWN 290ML appeared first on Elmers Hardware.

The post CT1 SEALANT AND ADHESIVE OAK 290ML appeared first on Elmers Hardware.

The post CT1 SEALANT AND ADHESIVE GREY 290ML appeared first on Elmers Hardware.

The post CT1 SEALANT AND ADHESIVE CLEAR 290ML appeared first on Elmers Hardware.