Pen Making Tools - Elmers Hardware

OZITO ENGRAVER 15W EGR-2050U

admin — Thu, 14 Feb 2019 10:28:33 +0000

This engraver is easy to use with adjustable stroke depth.
This Electric Engraver is suited to engraving metal, wood, glass, plastic and ceramics.
It features an adjustable depth of stroke to help you achieve visible markings depending on the application.
3 Year Replacement Warranty

admin — Fri, 01 Jul 2016 10:36:45 +0000

The serrated jaws, fitted as standard, can grip the workpiece both internally or externally and a range of optional jaws are also available
The chuck fits directly onto 1” x 8tpi threads or 3/4” x 16tpi using the insert
Supplied in a plastic storage case with space for optional jaws, wood screw, T-bar for locking jaws, Hex key for changing jaws and 3/4″ x 16tpi insert

admin — Fri, 01 Jul 2016 09:08:47 +0000

A set of 3 planer thicknesser knives made from HSS (High speed steel) to suit W583 planer thicknesser
Single edged
Size 251mm x 30mm x 3.2mm

admin — Fri, 01 Jul 2016 08:48:51 +0000

Developed following many requests from customers who found the W215 just too big for their workshop.
Folding Legs – No tools Required
Quick Action Clamps – Mount & Dismount in Seconds
Extendable Roller Supports – Height Adjustable Too
Light Weight and Portable
Incredibly strong yet incredibly light is the best way to describe this new model
The legs quickly fold down, without the need for any tools, and are made from round tube to keep the weight down
There are two roller supports, one at each end, which are adjustable to provide complete support for work pieces up to 2 metres in length
Also a flip-up stop attached to each roller which speeds up repeat cuts
The two base runners remain attached to the tool and a simple lever locks the runners onto the stand
For smaller bench top machines you might even mount two at the same time
The roller supports make it ideal for using with a mitre saw, router table, planer or thicknesser. We have also used them with a lathe, disc sander, belt sander, morticer. bandsaw and grinder
A 2nd set of runners can be purchased that will then allow different tools to be swapped over in seconds

Can be Used With:

Please note: Additional mounting holes may need drilling in the base of your tool if not pre-drilled by the manufacturer

Maximum recommended weight is 80kg

admin — Thu, 30 Jun 2016 11:58:46 +0000

For Any Power tools Up To 2200 watts
Integral 3 Pin Socket
Separate Start and Stop Buttons
Cover Acts As Emergency Stop
Supplied With 2m Cable and Plug
For use with 220v-240v power tools only
The switch can be mounted to the steel frame of any router table or mounted in any convenient location avoiding the user having to reach under the table to turn the router on and off
The switch also provides a handy emergency stop button
There is an integral socket built into the underside of the casing.
Simply plug your powertool into the socket and connect the plug to your electric supply.
2 Slotted fixing points allow the switch to be used with any router table, commercial or home made
In order to use a router with an NVR switch you need to be able to lock the router switch in the ‘On’ position, for hands free operation. If your router has a trigger type switch which cannot be locked on you will need to contact the manufacturer or their distributor to obtain a fastening clip. Some routers can also be rewired to bypass the router switch and use this NVR switch instead.

admin — Thu, 30 Jun 2016 11:47:30 +0000

This extended handle is longer than the one originally supplied with the chuck and is of benefit to people working on larger diameter bowls
The handle will clear bowls of up to 14” diameter on the Viper2, 15″ on the Viper3 and 17″ on the Viper5
Shaft length 180mm
Cross bar 190mm
Square end is 8mm square
Compatible with Viper2, Viper3, Viper5 & Nexus3 chucks plus other chucks with 8mm square drive end

admin — Thu, 30 Jun 2016 11:28:24 +0000

Optional chuck insert for using Viper3, Viper5 or Nexus3 chucks on a lathe with a 1″ x 8tpi thread on the headstock
The internal thread is 1″ x 8tpi and the external thread is M33 x 3.5
Both threads are 32mm in length

admin — Thu, 30 Jun 2016 11:08:30 +0000

The best selling size from the Charnwood Viper range
A 4″ sized scroll chuck, with the jaws adjusted by a geared mechanism for simple one handed operation
Self centring, high precision design
Ideal for Midi sized lathes and upwards
The fully enclosed design prevents the build up of chips and dust inside the gear mechanism
The standard dovetail jaws can grip the workpiece both internally or externally depending on the style and shape of the piece to be turned
The chuck fits directly onto lathes with headstock thread size M33x3.5tpi. for all other sizes an optional insert is required
We also include a wood screw which clamps into the centre of the chuck for the initial mounting of bowl blanks
Supplied with standard dovetail jaws, wood screw, T-bar for locking the jaws and T-handled hex key for swapping the jaws

admin — Thu, 30 Jun 2016 10:37:07 +0000

A compact scroll chuck, with the jaws adjusted by a geared mechanism for simple one handed operation
Self centring, high precision design. Ideal for Mini and Midi sized lathes
The standard dovetail jaws can grip the workpiece both internally or externally depending on the style and shape of the piece to be turned
The chuck fits directly onto lathes with headstock thread size 1” x 8tpi and we include as standard an adaptor for using the chuck with all lathes which have a 3/4” x 16tpi
We also include a wood screw which clamps into the centre of the chuck for the initial mounting of bowl blanks
Supplied with dovetail jaws, wood screw, T-bar for locking the jaws, T-handled hex key for swapping the jaws and 3/4″ x 16tpi insert

admin — Thu, 30 Jun 2016 10:19:17 +0000

Set of 4 optional jaws for Viper3 geared scroll chuck
The Wide jaws have a serrated edge both internally and externally and can grip much larger pieces than the standard jaws
Projects 13mm from base plate
Expands from 89mm to 124mm
Contracts from 110mm to 75mm