Description
Fill the whirlpool with warm water, up to 5 cm above the highest opening in the jets for water and air.
Add 50 to 75ml of HG hygienic whirlpool bath cleaner directly to the contents of the bath.
Activate the system and allow it to run for approximately 15 minutes.
Empty the bath and rinse it thoroughly, using clean water.
To prevent the build up of container pollution, repeat the treatment every 2 to 3 weeks, depending on the use of the whirlpool, or fill the whirlpool’s integrated cleaning system, or the automatic cleaning system, with HG hygienic whirlpool bath cleaner.
Refer further to the instruction manual for your whirlpool.
